Hello,
Is it possible to add wear tables, in CNC 11, on the tool geometry offset library page?
like if I had a reground e mill and the touch probe figured the Diameter to be .234 and I wanted to do a test cut saying away .010. I could put the .01 in a wear table.
thanks
Can I Add, and how: a functional geometry wear table option?
Moderator: cnckeith
-
bloomingtonmike
- Posts: 114
- Joined: Wed Sep 11, 2013 1:31 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 0916130849
- DC3IOB: No
- CNC11: Yes
- CPU10 or CPU7: No
Re: Can I Add, and how: a functional geometry wear table opt
Why not create a second tool adding the additional test diameter to the tool definition?
Mikie in Bloomington IL
-
diycncscott
Re: Can I Add, and how: a functional geometry wear table opt
Mike,
That's a great suggestion - and the one we usually suggest.
FWIW CNC11 Lathe software does have a "tool wear" offset table. I'll see what we can do about getting into the CNC11 Mill software.
That's a great suggestion - and the one we usually suggest.
FWIW CNC11 Lathe software does have a "tool wear" offset table. I'll see what we can do about getting into the CNC11 Mill software.