Is there a wiring diagram for the ALLIN1DC to the GS2-XXXX
There are wiring diagrams for the GS2 to the GPIO4D in the respective install manuals
But not for the ALLIN1DC to GS2 Spindle Inverter that i could find. (drawing is for the SJ100)
I see the similarities, If I assume some pins are in common from GPIO4D and the ALLIN1DC
OUT5, OUT7, OUT8, IN10, COM9 -12 Same from GPIO4 and ALLIN1DC (?)
Clarification (or Drawing) needed for:
12VDC and 12 COM : is this external supply voltage to the GS2, or does this come from the ALLIN1DC?
Spindle Analog (A1), Spindle Analog Com(ACM), where do these input/outputs goto on the ALLIN1DC?
Thank you.
GS2-XXXX ALLIN1DC
Moderator: cnckeith
-
- Posts: 114
- Joined: Wed Sep 11, 2013 1:31 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 0916130849
- DC3IOB: No
- CNC11: Yes
- CPU10 or CPU7: No
Re: GS2-XXXX ALLIN1DC
Would it help to see the Hitachi WJ200 2.2kw connections to the AllInOneDC?
Mikie in Bloomington IL
-
- Posts: 6
- Joined: Fri Dec 06, 2013 9:56 pm
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: A900360
- DC3IOB: No
- CNC11: Yes
- CPU10 or CPU7: No
Re: GS2-XXXX ALLIN1DC
It just might.
Can you provide a link to it please.
Thanks you.
Can you provide a link to it please.
Thanks you.
-
- Posts: 6
- Joined: Fri Dec 06, 2013 9:56 pm
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: A900360
- DC3IOB: No
- CNC11: Yes
- CPU10 or CPU7: No
Re: GS2-XXXX ALLIN1DC
Looking at the connections for the SJ200 did not help.
Not the same as the GS2.
Not the same as the GS2.
-
- Posts: 428
- Joined: Mon Jul 18, 2011 9:57 am
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: GS2-XXXX ALLIN1DC
Please see the attached schematic for wiring between the GS2 and ALLIN1DC.
- Attachments
-
- allin1GS2.pdf
- (67.44 KiB) Downloaded 273 times
When requesting support READ THIS POST first. https://www.viewtopic.php?f=60&t=1043
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)