Good nema23 dc servo motor and encoder recomendation
Moderator: cnckeith
-
- Posts: 114
- Joined: Wed Sep 11, 2013 1:31 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 0916130849
- DC3IOB: No
- CNC11: Yes
- CPU10 or CPU7: No
Good nema23 dc servo motor and encoder recomendation
Can anyone recommend a good nema 23 dc servo motor and encoder? I am wanting to try a cheaper 4th axis setup and will most likely go chinese and many use nema 23 motors. What do folks recommend?
Mikie in Bloomington IL
-
- Posts: 7164
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Good nema23 dc servo motor and encoder recomendation
i've used pittman motors in the past.
http://www.automationexpress.com/Produc ... otors.aspx
http://www.automationexpress.com/Produc ... otors.aspx
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html