Bridgeport Retrofit Example with Re-Usable Components Shown

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
Centroid_Liviu
Posts: 428
Joined: Mon Jul 18, 2011 9:57 am
Allin1DC CNC Controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes

Bridgeport Retrofit Example with Re-Usable Components Shown

Post by Centroid_Liviu »

The below image is an example of Bridgeport that has been retrofitted with the AJAX Bridgeport Boss Kit using the ALLIN1DC. Most of the original components were re-usable, saving the end-user both time and money.
Attachments
Bridgeport_vx2_retrofit_rev3.jpg
When requesting support READ THIS POST first. https://www.viewtopic.php?f=60&t=1043

Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.

(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Post Reply