MPU11 and GPIO4D PARTS

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
Metalstech
Posts: 8
Joined: Thu Mar 18, 2010 1:24 pm
Allin1DC CNC Controller: No
CNC Control System Serial Number: 1015090082
DC3IOB: No
CNC11: No
CPU10 or CPU7: No
Location: Lake Villa,IL

MPU11 and GPIO4D PARTS

Post by Metalstech »

I am in need of the MPG plug and pins for my MPU11 board.
Can someone tell me what the make,style,or part number to the mate of the MPG socket is?
I had purchased the Mach3/Ajax 3rd party kit back in Oct. 2009, ser.# 1015090082
Is there an illustration or drawing available that lists what the mfr. Part # for the different sockets or plugs on these boards? Could these parts be added to your website for purchase in the near future?
After numerous interruptions and distractions over the past few years I recently got my Bridgeport Series 1 Interact running!
Thank you, John
Centroid_Liviu
Posts: 428
Joined: Mon Jul 18, 2011 9:57 am
Allin1DC CNC Controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes

Re: MPU11 and GPIO4D PARTS

Post by Centroid_Liviu »

Are you building your own MPG? I have attached a schematic that includes the pin-out for the cable we use with our MPG. The 6' cable is available for $50 alone and is included with our MPG.
Attachments
MPU11_AND_CABLES.pdf
(75.5 KiB) Downloaded 264 times
When requesting support READ THIS POST first. https://www.viewtopic.php?f=60&t=1043

Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.

(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Metalstech
Posts: 8
Joined: Thu Mar 18, 2010 1:24 pm
Allin1DC CNC Controller: No
CNC Control System Serial Number: 1015090082
DC3IOB: No
CNC11: No
CPU10 or CPU7: No
Location: Lake Villa,IL

Re: MPU11 and GPIO4D PARTS

Post by Metalstech »

Yes I have built my own MPG unit and am in need of just the female plug and crimp pins to finish. Any help on the part # and make would help. I would like to purchase just the rectangular plug and pin? Thank you, John
billb95
Posts: 7
Joined: Thu Jan 03, 2013 9:39 am
Allin1DC CNC Controller: No
CNC Control System Serial Number: 816120601
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: No

Re: MPU11 and GPIO4D PARTS

Post by billb95 »

Did you have any luck finding the type/part number as I need a spare plug for my setup?
Post Reply