Mach still "running" in E-stop, so far conversion going well
Posted: Mon Aug 06, 2012 11:32 am
Greetings all,
I finally have all 3 axis running on my Bostomatic mill conversion, one of the unresolved issues is that in E-stop, the machine stops (e-top relay kills the Glentek drives as well as dropping 24vdc to the GPIO4D)) yet Mach appears to be running in the background. (not fully following the program)
I see the encoder counts clicking away when I hit E-stop and when I come out of E-stop the display for position keeps counting with no motion.
Feed Hold works perfect, machine stops, no movement of display counters for position.
Thanks,
Mike
Mach3
GPIO4D
MPU11
Glentek drives, DC servos
I finally have all 3 axis running on my Bostomatic mill conversion, one of the unresolved issues is that in E-stop, the machine stops (e-top relay kills the Glentek drives as well as dropping 24vdc to the GPIO4D)) yet Mach appears to be running in the background. (not fully following the program)
I see the encoder counts clicking away when I hit E-stop and when I come out of E-stop the display for position keeps counting with no motion.
Feed Hold works perfect, machine stops, no movement of display counters for position.
Thanks,
Mike
Mach3
GPIO4D
MPU11
Glentek drives, DC servos