Mach still "running" in E-stop, so far conversion going well

_______________________________________________________














LOGIN below to POST your questions and comments on AjaxCNC products.

Moderator: cnckeith

Post Reply
M232
Posts: 5
Joined: Mon Aug 06, 2012 11:18 am
Allin1DC CNC Controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: No
CNC11: No
CPU10 or CPU7: Yes
System Serial Number: S/N 50812044
PLC 1.4

Mach still "running" in E-stop, so far conversion going well

Post by M232 » Mon Aug 06, 2012 11:32 am

Greetings all,

I finally have all 3 axis running on my Bostomatic mill conversion, one of the unresolved issues is that in E-stop, the machine stops (e-top relay kills the Glentek drives as well as dropping 24vdc to the GPIO4D)) yet Mach appears to be running in the background. (not fully following the program)

I see the encoder counts clicking away when I hit E-stop and when I come out of E-stop the display for position keeps counting with no motion.

Feed Hold works perfect, machine stops, no movement of display counters for position.


Thanks,

Mike


Mach3
GPIO4D
MPU11
Glentek drives, DC servos

Post Reply

Who is online

Users browsing this forum: DICKEYBIRD and 2 guests