You can download the new software install manual for CNC11 3.06 here:
Centroid 3.06 Install Guide
This manual includes all Windows 7 setup parameters and guides you on installing the correct CNC11 software for your system. Also included are SSD specific settings if you are using such a drive.
NEW CNC11 3.06 Software Installation Manual
Moderator: cnckeith
-
- Posts: 428
- Joined: Mon Jul 18, 2011 9:57 am
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
NEW CNC11 3.06 Software Installation Manual
When requesting support READ THIS POST first. https://www.viewtopic.php?f=60&t=1043
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)