NEW CNC11 3.06 Software Installation Manual

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
Centroid_Liviu
Posts: 428
Joined: Mon Jul 18, 2011 9:57 am
Allin1DC CNC Controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes

NEW CNC11 3.06 Software Installation Manual

Post by Centroid_Liviu »

You can download the new software install manual for CNC11 3.06 here:

Centroid 3.06 Install Guide

This manual includes all Windows 7 setup parameters and guides you on installing the correct CNC11 software for your system. Also included are SSD specific settings if you are using such a drive.
When requesting support READ THIS POST first. https://www.viewtopic.php?f=60&t=1043

Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.

(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Post Reply