Enable Keyboard Jogging MPU11 or ALLIN1DC

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
Centroid_Liviu
Posts: 428
Joined: Mon Jul 18, 2011 9:57 am
Allin1DC CNC Controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes

Enable Keyboard Jogging MPU11 or ALLIN1DC

Post by Centroid_Liviu »

To enable keyboard jogging under MPU11/ALLIN1DC systems set parameter #148 to 0 and parameter 170 to 5. Do this if the suggested setting of 1 for parameter 170 does not work for you.
When requesting support READ THIS POST first. https://www.viewtopic.php?f=60&t=1043

Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.

(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Post Reply