Ho to all
Can some one help me and tell me to test a five axis CNC machine?
I know many professional person visit this forum so please help me that with what method can i test the a 5 axis CNC machine.
I decide to retrofit my old CNC machine with Ajax system. I am very interest in Ajax system but i don't know with what method can i test my CNC machine after retrofit it?
Please help me with simple and very precise method.
I am wait for your help.
Thank you
*** RESOLVED *** machine test
Moderator: cnckeith
-
- Posts: 428
- Joined: Mon Jul 18, 2011 9:57 am
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: machine test
Have you already completed the retrofit?
When requesting support READ THIS POST first. https://www.viewtopic.php?f=60&t=1043
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
-
- Posts: 9
- Joined: Wed Aug 10, 2011 1:58 pm
- Allin1DC CNC Controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: machine test
Hi Dear AjaxLiviu
Thank you for your reply.
No, I don't buy any ajax System yet but i really need to retrofit my old 3 axis machine to 5 axis.
I think if i machining a part and then measure but i don't know what shape can do the test completely. Can you please help me?
Thank you
Thank you for your reply.
No, I don't buy any ajax System yet but i really need to retrofit my old 3 axis machine to 5 axis.
I think if i machining a part and then measure but i don't know what shape can do the test completely. Can you please help me?
Thank you
-
- Posts: 428
- Joined: Mon Jul 18, 2011 9:57 am
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: machine test
sml2011,
How are you planning on doing your 4th and 5th axis? Our boards are capable of 6-8 axis if that is what you are asking? I am a little confused on what you are trying to test.
How are you planning on doing your 4th and 5th axis? Our boards are capable of 6-8 axis if that is what you are asking? I am a little confused on what you are trying to test.
When requesting support READ THIS POST first. https://www.viewtopic.php?f=60&t=1043
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
-
- Posts: 9
- Joined: Wed Aug 10, 2011 1:58 pm
- Allin1DC CNC Controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: machine test
I want you help me to know if i retrofit my old five axis machine with ajax cnc board, how can i test all five axis and know that does it work precise or need toning or backlash.....?
I am looking to know some method for est my 5 axis cnc machine after retrofit it with ajax cnc board.
Thank you
I am looking to know some method for est my 5 axis cnc machine after retrofit it with ajax cnc board.
Thank you
-
- Posts: 21
- Joined: Wed Aug 03, 2011 1:29 pm
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: machine test
We do not have any type of program that will test the capabilities of a 5-axis system. The only thing that we do have is the Euclid Block program, which I believe is Industry Standard, that tests a standard 3-axis Mill system. Thanks.