Can't activate Spindle in Mach 3

_______________________________________________________














LOGIN below to POST your questions and comments on AjaxCNC products.

Moderator: cnckeith

Post Reply
sandcrab123
Posts: 34
Joined: Tue Mar 22, 2011 9:59 am
Allin1DC CNC Controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: No
System Serial Number: none

Can't activate Spindle in Mach 3

Post by sandcrab123 » Sun Sep 25, 2011 1:59 pm

I was able to configure my Hitachi wj200 to work in Mach 3 with the m3 s2000 command and increase/decrease the speed with the buttons on screen. I then went to CNC11 to confirm that it would function and it would not, but that's another issue. When I went back to Mach 3, it won't work there either.

When I MDI M3 S2000 in Mach 3 the yellow button flashes in the spindle screen and nothing happens. When I check the diagnostics, the output 1 button is flashing red. What happened?

I am also having an issue trying to home my x axis. My y and z axis hit the switch and back off like there supposed to, but my Z axis just goes to estop. I tried upping the debounce to 4000, but no difference. I also changed the micro switch and that made no difference either.

Thanks for your help guys. Were getting real close to having a working machine,

Dan

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests