I am considering using the Ajax system to retrofit a Mori Seike SL1 CNC lathe. I have retrofitted
a Bridgeport mill and built 2 cnc machines from scratch. Am wondering if I would be abe to do this
and how much help is available. thanks Keith Clark
**RESOLVED** Mori Seiki SL1 CNC lathe retrofit
Moderator: cnckeith
-
thespindoctor
- Posts: 1
- Joined: Sun Sep 18, 2011 11:02 am
- Allin1DC CNC Controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
-
Centroid_Liviu
- Posts: 428
- Joined: Mon Jul 18, 2011 9:57 am
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: Mori Seiki SL1 CNC lathe retrofit
I believed we talked on the phone. Let me know if you have any additional questions.
In general it is best if all available information is provided on a machine (motors: in-lb, ac/dc, voltage..). There are many different makes and models of machines out there having this information handy will allow us to better provide you with available options in a quick manner.
In general it is best if all available information is provided on a machine (motors: in-lb, ac/dc, voltage..). There are many different makes and models of machines out there having this information handy will allow us to better provide you with available options in a quick manner.
When requesting support READ THIS POST first. https://www.viewtopic.php?f=60&t=1043
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)