That link is for the windows version. The latest version for linux is 3.01 (http://www.ajaxcnc.com/downloads/softwa ... 01r3up.zip).
To install the Mill update for Linux unzip the file to a directory on your usb stick -this will create two files: mill-update.zip and install.sh. Do NOT extract millupdate.zip. Insert the usb stick in the control and select F7-Utilities ->F2 Update from the main screen. Use the arrow keys select the usb stick and press enter. Now use the arrow keys to navigate/highlight the directory where you placed mill-update.zip and install.sh and press F10 to accept. Power off when the update is complete.
***RESOLVED*** Constant Feed Rate
Moderator: cnckeith
-
- Posts: 430
- Joined: Mon Jul 18, 2011 9:57 am
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: Constant Feed Rate
When requesting support READ THIS POST first. https://www.viewtopic.php?f=60&t=1043
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
-
- Posts: 13
- Joined: Thu May 05, 2011 9:55 am
- Allin1DC CNC Controller: No
- CNC Control System Serial Number: (0122100131)
- DC3IOB: No
- CNC11: Yes
- CPU10 or CPU7: No
Re: Constant Feed Rate
After downloading and installing the latest software version,all problems have ceased.
The feed rate is constant on all moves and all the axii stop at the programmed position.
Thanks for your excruciatingly slow but effective help.
This probably could have been dealt with by 1 maybe 2 phone calls in one day.
It's been 27 days since my initial post.
The feed rate is constant on all moves and all the axii stop at the programmed position.
Thanks for your excruciatingly slow but effective help.
This probably could have been dealt with by 1 maybe 2 phone calls in one day.
It's been 27 days since my initial post.