**RESOLVED** MPU11 Not Responding
Posted: Fri Aug 05, 2011 9:06 am
If you try to run CNC11 and you get the message " MPU11 Not Responding" please verify that the following tasks are true:
1- An Ethernet cable is run directly between the PC and MPU11. No switches, hubs, etc. are allowed.
2- You can successfully "ping" the motherboards network port(10.168.41.1) and the MPU11(10.168.41.2).
3- Windows firewall and defender are turned off completely.
4- Anti-virus, firewalls, ant-male-ware, etc. are not running. We highly suggest not even installing any.
5- When running CNC11 you are running it as Administrator.
1- An Ethernet cable is run directly between the PC and MPU11. No switches, hubs, etc. are allowed.
2- You can successfully "ping" the motherboards network port(10.168.41.1) and the MPU11(10.168.41.2).
3- Windows firewall and defender are turned off completely.
4- Anti-virus, firewalls, ant-male-ware, etc. are not running. We highly suggest not even installing any.
5- When running CNC11 you are running it as Administrator.