**RESOLVED** MPU11 Not Responding

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Locked
AjaxTech
Posts: 21
Joined: Wed Aug 03, 2011 1:29 pm
Allin1DC CNC Controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes

**RESOLVED** MPU11 Not Responding

Post by AjaxTech »

If you try to run CNC11 and you get the message " MPU11 Not Responding" please verify that the following tasks are true:

1- An Ethernet cable is run directly between the PC and MPU11. No switches, hubs, etc. are allowed.
2- You can successfully "ping" the motherboards network port(10.168.41.1) and the MPU11(10.168.41.2).
3- Windows firewall and defender are turned off completely.
4- Anti-virus, firewalls, ant-male-ware, etc. are not running. We highly suggest not even installing any.
5- When running CNC11 you are running it as Administrator.
Locked