**RESOLVED** MPU11 Not Responding

_______________________________________________________














LOGIN below to POST your questions and comments on AjaxCNC products.

Moderator: cnckeith

Locked
AjaxTech
Posts: 21
Joined: Wed Aug 03, 2011 1:29 pm
Allin1DC CNC Controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
System Serial Number: none

**RESOLVED** MPU11 Not Responding

Post by AjaxTech » Fri Aug 05, 2011 9:06 am

If you try to run CNC11 and you get the message " MPU11 Not Responding" please verify that the following tasks are true:

1- An Ethernet cable is run directly between the PC and MPU11. No switches, hubs, etc. are allowed.
2- You can successfully "ping" the motherboards network port(10.168.41.1) and the MPU11(10.168.41.2).
3- Windows firewall and defender are turned off completely.
4- Anti-virus, firewalls, ant-male-ware, etc. are not running. We highly suggest not even installing any.
5- When running CNC11 you are running it as Administrator.

Locked

Who is online

Users browsing this forum: Sportbikeryder and 1 guest