I found your Limit switch values from your previos post kindle see the attahced picture
I hope this will definitely solve your problem your homing is in +ve direction and you set homing switch to zero thats why control home by index pulse .
**RESOLVED** :) homing Y errors
Moderator: cnckeith
-
- Posts: 56
- Joined: Fri Jun 10, 2011 8:40 am
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
-
- Posts: 56
- Joined: Fri Jun 10, 2011 8:40 am
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: homing Y errors
or you may change your homing sequence to m91/y that will also solve your problem
Enjoy now
Enjoy now
-
- Posts: 24
- Joined: Sun Feb 20, 2011 10:19 am
- Allin1DC CNC Controller: No
- CNC Control System Serial Number: A50383
- DC3IOB: Yes
- CNC11: No
- CPU10 or CPU7: Yes
Re: homing Y errors
thank you thank you thank you!
i changed the homing sequence and now it works.
you're awesome!
best
david
i changed the homing sequence and now it works.
you're awesome!
best
david
-
- Posts: 56
- Joined: Fri Jun 10, 2011 8:40 am
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: SOLVED :) homing Y errors
No problem david
CNC-Global
CNC-Global
-
- Posts: 24
- Joined: Sun Feb 20, 2011 10:19 am
- Allin1DC CNC Controller: No
- CNC Control System Serial Number: A50383
- DC3IOB: Yes
- CNC11: No
- CPU10 or CPU7: Yes
Re: SOLVED :) homing Y errors
works like a charm now - thanx again
-
- Posts: 28
- Joined: Tue Mar 23, 2010 8:54 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
- Location: Pennsylvania
Re: SOLVED :) homing Y errors
Great Posts/Thread!