Bridgeport mill 9 x42

_______________________________________________________














LOGIN below to POST your questions and comments on AjaxCNC products.

Moderator: cnckeith

Post Reply
HobbieZones.com
Posts: 1
Joined: Tue May 17, 2011 3:10 pm
Allin1DC CNC Controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: No
CPU10 or CPU7: No
System Serial Number: none

Bridgeport mill 9 x42

Post by HobbieZones.com » Tue May 17, 2011 3:24 pm

Hi looking at putting cnc controls on a 1978 Bridgeport mill table is 9x42.

Would not need the pc or lcd have spare one.

Looking at the Digitizing option that would be so handy. Also can it be added later on ?

Mill would need ball screws.

Just what would it take $$ to make this happen.

Most of the time cutting Alum or Steel.

Link to some parts made in past on Mill/Drill http://www.hobbiezones.com/page14.php

Also would anyone in the Iowa area have one to look at ?

Thank you

Post Reply

Who is online

Users browsing this forum: Baidu [Spider] and 2 guests