**RESOLVED** Can The MPU11 Run Centroid CNC10 Software?

_______________________________________________________














LOGIN below to POST your questions and comments on AjaxCNC products.

Moderator: cnckeith

Locked
sml
Posts: 19
Joined: Thu Mar 18, 2010 12:16 pm

**RESOLVED** Can The MPU11 Run Centroid CNC10 Software?

Post by sml » Tue Mar 23, 2010 3:26 am

Hi
Can i used MPU11 for centroid software(CNC10) ?
Thank you
S.M.L

cnckeith
Posts: 605
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
System Serial Number: none
Contact:

Re: MPu11 version 3.0

Post by cnckeith » Tue Mar 23, 2010 9:20 am

Hello. the Mpu11 and the CNC10 have their own unique versions of CNC software. Both can be found on our website.
http://www.ajaxcnc.com/tech/downloads/software/

the current version for cnc10 is v2.66

the current version for MPU11 is v3.0

diycncscott
Posts: 686
Joined: Thu Mar 04, 2010 4:03 pm

Re: MPu11

Post by diycncscott » Tue Mar 23, 2010 9:25 am

Hi SML,

Yes, you can use Centroid software on an MPU11 system. The latest generation Centroid software which runs on MPU11 systems is actually called CNC11 but it is functionally and visally equivalent to CNC10 -plus it offers several new features over the older CNC10 software!

These features are all included as standard when you purchase the CNC11* software ($500) to go with your MPU11 hardware:
  • Intercon -Conversational Programming Software
  • 4MB Standard file size*
  • Multiple Work coordinate systems - G54-G59*
  • Sub Programs and Macros*
  • S Function for Programmable Spindle Speed*
  • Compression Tapping*
  • Drilling Cycles*
.. and more!


*Requires soon to be released CNC11 v3.1 Note: All MPU11 users have access to free software upgrades when a new version is released.

sml
Posts: 19
Joined: Thu Mar 18, 2010 12:16 pm

Re: MPu11

Post by sml » Wed Mar 24, 2010 3:38 am

Thanks Scott
Please sent for me a demo of cnc11 v3.1 to below email address if you have.
semalocnc@mail.com
Thank you

diycncscott
Posts: 686
Joined: Thu Mar 04, 2010 4:03 pm

Re: Can The MPU11 Run Centroid CNC10 Software?

Post by diycncscott » Wed Mar 24, 2010 1:43 pm

SML,

As mentiond in this post: http://www.ajaxcnc.com/ajaxbb/viewtopic.php?f=20&t=12

You can download the current version of our demo software. I don't have a demo of the latest CNC11 but the current demo is visually and functionally equivalent to what you will see in CNC11.

sml
Posts: 19
Joined: Thu Mar 18, 2010 12:16 pm

Re: Can The MPU11 Run Centroid CNC10 Software?

Post by sml » Thu Mar 25, 2010 4:24 pm

Ok
Thank you Scott

Locked

Who is online

Users browsing this forum: No registered users and 2 guests