Mach and Assigning LED Error

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
please no smoke
Posts: 103
Joined: Mon Mar 29, 2010 10:17 pm

Mach and Assigning LED Error

Post by please no smoke »

Scott showed me how to assign a led in mach but it would not work. Turns out there is an error in brains as stated by "popa bear". See below:

http://ajaxcnc.com/ajaxbb/viewtopic.php ... 1&start=10
Post Reply