Defeating a Limit Switch Input On The DC3IOB

_______________________________________________________














LOGIN below to POST your questions and comments on AjaxCNC products.

Moderator: cnckeith

Post Reply
diycncscott
Posts: 634
Joined: Thu Mar 04, 2010 4:03 pm

Defeating a Limit Switch Input On The DC3IOB

Post by diycncscott » Mon Mar 22, 2010 3:06 pm

Defeating A Limit Switch Input On The DC3IOB

Limit switch inputs may be electrically defeated by either jumping the input to the input common or by using the Limit DIP Switches on the DC3IOB. Both methods are electrically the same.

Defeating Limit Switch Inputs Using Limit DIP Switches:

Using the Limit DIP Switches, a limit switch is defeated by setting the appropriate switch to
the UP position. Setting the switch to the DOWN position, enables the limit switch and will
prevent motor motion when the input is open.

In the photo below, the X+, Y+ and Z+ limit switch inputs have been defeated by setting the
X+, Y+ and Z+ switches to the UP position.
DIPSwitches.jpg
DIPSwitches.jpg (84.92 KiB) Viewed 1697 times


Defeating Limit Switch Inputs By Jumping The Limit Input To Input Common:

Limit switches can also be defeated by jumping any of the limit switch inputs to input common on H21.
In the photo to the below, the X-, Y- and Z- limit switch inputs have been defeated by jumping the
input(s) to input common.
H21.jpg
H21.jpg (88.98 KiB) Viewed 1691 times

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests