I have been trying to program my Xkeys pad. Immediately on starting macroworks, an error message pops up as follows.
Error in legend file
Missing image file:
C:\users\cnc user\desktop\Centroid_Xkeys24\key_images\ and then the button name.
When I close this message, it pops back up with the next button name and on through all 24 names.
There is no "cnc user" directory and how does macroworks know anything about centroid on startup ??
Larry
Programming Xkeys pad
Moderator: cnckeith
-
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Programming Xkeys pad
Did you see this page?lvanduyn wrote: ↑Sun Feb 25, 2018 11:55 am I have been trying to program my Xkeys pad. Immediately on starting macroworks, an error message pops up as follows.
Error in legend file
Missing image file:
C:\users\cnc user\desktop\Centroid_Xkeys24\key_images\ and then the button name.
When I close this message, it pops back up with the next button name and on through all 24 names.
There is no "cnc user" directory and how does macroworks know anything about centroid on startup ??
Larry
http://www.centroidcnc.com/centroid_diy ... ntrol.html
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 62
- Joined: Tue Jan 30, 2018 2:26 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: E8EB112A1F04-0206180612
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
- Location: Alamogordo NM
Re: Programming Xkeys pad
Hi Marty
Yes. I had watched your video before buying the Xkeys but it doesn't show how you got it programmed.
The problem is that this error message pops up as soon as macrowork loads. I am trying to program
this on my desktop machine. Do I need to do this on the machine that has the Acorn software installed
and running ?
Larry
Yes. I had watched your video before buying the Xkeys but it doesn't show how you got it programmed.
The problem is that this error message pops up as soon as macrowork loads. I am trying to program
this on my desktop machine. Do I need to do this on the machine that has the Acorn software installed
and running ?
Larry
-
- Posts: 7
- Joined: Sat Mar 03, 2018 8:22 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: Yes
Re: Programming Xkeys pad
Ivanduyn,
I ran into the same thing last week, so I created the file extension that it was looking for and put my image files in there. They loaded just fine. Let me know if you want screen shots or any other info.
-Bill
I ran into the same thing last week, so I created the file extension that it was looking for and put my image files in there. They loaded just fine. Let me know if you want screen shots or any other info.
-Bill
-
- Posts: 62
- Joined: Tue Jan 30, 2018 2:26 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: E8EB112A1F04-0206180612
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
- Location: Alamogordo NM
Re: Programming Xkeys pad
Hi Bill
I was trying to program the xkeys on my desktop computer. Doesn't work.
Found out that it needs to be done on the PC which has the Acorn software installed.
The directories that macroworks needs are there.
I was trying to program the xkeys on my desktop computer. Doesn't work.
Found out that it needs to be done on the PC which has the Acorn software installed.
The directories that macroworks needs are there.
-
- Posts: 793
- Joined: Thu Apr 12, 2018 11:16 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: Programming Xkeys pad
I watched the video and downloaded the zip file. I'm not following how to program the Xkeys pad. Are there directions somewhere? I fixed the filepath issue for the images in both .lgd files. Not sure which to load, program, etc.
-
- Posts: 7292
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Programming Xkeys pad
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html