OAK Custom control panel using 11077 connector?

_______________________________________________________














LOGIN below to POST your questions and comments on AjaxCNC products.

Moderator: cnckeith

Post Reply
jj80909
Posts: 3
Joined: Sun Feb 11, 2018 1:39 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: No
CPU10 or CPU7: No
System Serial Number: none

OAK Custom control panel using 11077 connector?

Post by jj80909 » Mon Feb 12, 2018 2:37 pm

Do you have any more information on the optional 11077 control panel connector on the OAK board? I would like to create a custom panel with individual switches and wire them to utilize the control panel connector on the OAK board. Also, using the existing connector will make for a cleaner install.

I have downloaded and looked at the wiring diagrams. There is a drawing for the 11077 control panel, but it does not specify the connector used or the factory used pin-outs.

Reference data on mating connectors for the other board connectors would also be appreciated.
Attachments
OAK_11077.pdf
(52.9 KiB) Downloaded 8 times

bfreestone
Posts: 9
Joined: Fri Feb 09, 2018 1:02 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: No
CPU10 or CPU7: Yes
System Serial Number: none
Location: Boston, MA

Re: OAK Custom control panel using 11077 connector?

Post by bfreestone » Mon Feb 12, 2018 2:54 pm

The operators control panel uses switches matrixed into a microprocessor that communicates with the mpu11 so it's not as simple as making your own cable and plugging it in. I believe Centroid offers the PLC Add 6464 for people that want to make custom machine control panels. There is also an add 1616 if you don't need that many switches you would also have to custom code the PLC to work with your inputs. Centroid offers custom overlays of the Aux buttons on the pendant if that's enough for your use.

http://www.centroidcnc.com/downloads/ce ... visual.pdf

Post Reply

Who is online

Users browsing this forum: lvanduyn, RandyL and 2 guests