centroid all in one pc
Moderator: cnckeith
-
- Posts: 54
- Joined: Thu Feb 08, 2018 5:21 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
- Contact:
centroid all in one pc
I'm at the point of my conversion of a mini 7x10 lathe i need to buy the PC. I'm looking at an all in one from best buy or the one Centroid sells. does anyone have any more info on the Centroid one? Just wondering how it compares to a similarly priced one from elsewhere.
Jeremy
Pittsburgh, PA
Pittsburgh, PA
-
- Posts: 177
- Joined: Thu Jan 26, 2017 11:45 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 10583
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: Yes
- Location: North Carolina
Re: centroid all in one pc
From my experience you may be better off to stay clear of any normal retail outlet for purchasing a computer as they usually come packed full of extra installed software that will likely be very annoying. I have had better luck with either more generic suppliers or even buying refurbished / off lease computers as they are usually supplied with only a basic install of the OS.
-
- Posts: 428
- Joined: Mon Jul 18, 2011 9:57 am
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: centroid all in one pc
The Centroid ALLIN1PC is set up ready to go and communicate with our Controls. The PCs run Windows 10 and are equipped with a Touchscreen. We do not make the ALLIN1PCs but we do set them up, which does involve removing all the bloatware that comes on them from a typical retailer.
When requesting support READ THIS POST first. https://www.viewtopic.php?f=60&t=1043
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
-
- Posts: 54
- Joined: Thu Feb 08, 2018 5:21 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
- Contact:
Re: centroid all in one pc
I was asking for more information on the specs of the computer.
Jeremy
Pittsburgh, PA
Pittsburgh, PA
-
- Posts: 428
- Joined: Mon Jul 18, 2011 9:57 am
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: centroid all in one pc
For the ALLIN1PC: 19" Touch-Screen, 4GB RAM, Intel i3 Processor, 1TB hard-drive. Specifications are subject to change.
When requesting support READ THIS POST first. https://www.viewtopic.php?f=60&t=1043
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
-
- Posts: 728
- Joined: Mon Feb 19, 2018 2:52 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 38D269594F9C-0110180512
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: UK
- Contact:
Re: centroid all in one pc
Dunno why the secrecy! The one shown is a Dell - but Dell doesn't seem to make it any more. Presumably Centroid have a load in stock still.
I found a used MSI Pro 24T 6M on ebay (UK) for £400 - works nicely so far. https://www.msi.com/All-in-One-PC/Pro-24-6M.html
I see that Shuttle also make a nice looking AIO machine which would have been my choice for a new machine. https://www.ambros.co.uk/computer-shop ... pc-system/
Murray
I found a used MSI Pro 24T 6M on ebay (UK) for £400 - works nicely so far. https://www.msi.com/All-in-One-PC/Pro-24-6M.html
I see that Shuttle also make a nice looking AIO machine which would have been my choice for a new machine. https://www.ambros.co.uk/computer-shop ... pc-system/
Murray
-
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: centroid all in one pc
Minimum PC requirements:
http://www.centroidcnc.com/cnc_pc_perfo ... ments.html
I have found that most PCs with Intel 2.9ghz processors work. Strongly suggest solid state hard drives and 4gb of memory.
I don't fancy all in one PCs. Monitor craps out and you throw away the computer.
I tend to buy tiny footprint PCs and choose my own monitor. Intel NUC is an example of a tiny PC. Other manufacturers make similar units.
Marty
http://www.centroidcnc.com/cnc_pc_perfo ... ments.html
I have found that most PCs with Intel 2.9ghz processors work. Strongly suggest solid state hard drives and 4gb of memory.
I don't fancy all in one PCs. Monitor craps out and you throw away the computer.
I tend to buy tiny footprint PCs and choose my own monitor. Intel NUC is an example of a tiny PC. Other manufacturers make similar units.
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ