Page 1 of 1

cnc12 lathe or mil not starting

Posted: Tue Jan 23, 2018 8:27 pm
by Serge10667
I installed new CNC12 lathe worked fine with the test set up
I installed CNC12 mill on the same PC, not starting and CNC 12 lathe not starting also, the led communication and blue hard beet are ok.
How do I fix this problem?
Can we install both lathe and mill on the same PC

Re: cnc12 lathe or mil not starting

Posted: Wed Jan 24, 2018 1:48 am
by Serge10667
Hi,
The problem was no communication with the Ethernet the green light was not blinking.
I powered down the 24V supply and restarted it, the cnc121 is communicating correctly with the PC with the green light blinking all the time. Both programs CNC 121 Lathe and Mill are working correctly.
Hope this will help someone else.

Re: cnc12 lathe or mil not starting

Posted: Wed Jan 24, 2018 2:14 pm
by frijoli
Thanks for sharing the solution!

Clay