**RESOLVED** Spindle Reset

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Locked
dawizard
Posts: 20
Joined: Fri Jun 18, 2010 3:05 pm

**RESOLVED** Spindle Reset

Post by dawizard »

What is the function of spindle reset?
Centroid_Tech
Posts: 286
Joined: Thu Mar 18, 2010 2:24 pm

Re: Spindle Reset

Post by Centroid_Tech »

The spindle reset allows the control to clear an inverter fault by cycling the estop. This is good because you don't have to get into your electrical cabinet to clear the inverter when it's in a fault state.
When requesting support, please ALWAYS post a current report. Find out how to take a report from your Acorn, CNC11 or CNC10 system here: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.

If your question is PLC, Macro or program related, please also post a copy of the program or macro as well.

Without the above information we may not be able to help and/or reply until the required information is posted..
Locked