MPG cable JST connector number? <answered >

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
tblough
Posts: 3072
Joined: Tue Mar 22, 2016 10:03 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Boston, MA
Contact:

MPG cable JST connector number? <answered >

Post by tblough »

Some idiot who shall remain nameless misplaced the connectors that came with his OAK and now he needs the part number for the JST plug that connects to the MPG header on the OAK (same as the MPU11/ALLIN1DC). I believe the connector is PDUP-24V-s and the contacts are SPUD-002T-P0.5. Can someone confirm this or give me the correct number so I can look for some replacements?
Cheers,

Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Centroid_Tech
Posts: 286
Joined: Thu Mar 18, 2010 2:24 pm

Re: MPG cable JST connector number?

Post by Centroid_Tech »

The manufacturer part number for the MPG connector is PADP-24V-1-S and you can order them here https://www.digikey.com/product-detail/ ... ND/1300227 while the manufacturer part number for the pins for that connector is SPH-001T-P0.5L and you can order them here https://www.digikey.com/products/en?key ... -2147-2-ND.
When requesting support, please ALWAYS post a current report. Find out how to take a report from your Acorn, CNC11 or CNC10 system here: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.

If your question is PLC, Macro or program related, please also post a copy of the program or macro as well.

Without the above information we may not be able to help and/or reply until the required information is posted..
Post Reply