MPG cable JST connector number? <answered >

_______________________________________________________














LOGIN below to POST your questions and comments on AjaxCNC products.

Moderator: cnckeith

Post Reply
tblough
Posts: 131
Joined: Tue Mar 22, 2016 10:03 am
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: No
System Serial Number: 100505
100327
102696
Location: Boston, MA
Contact:

MPG cable JST connector number? <answered >

Post by tblough » Sun Dec 31, 2017 9:05 pm

Some idiot who shall remain nameless misplaced the connectors that came with his OAK and now he needs the part number for the JST plug that connects to the MPG header on the OAK (same as the MPU11/ALLIN1DC). I believe the connector is PDUP-24V-s and the contacts are SPUD-002T-P0.5. Can someone confirm this or give me the correct number so I can look for some replacements?
Cheers,

Tom
Confidence is the feeling you have before you fully understand the situation.

Centroid_Tech
Posts: 156
Joined: Thu Mar 18, 2010 2:24 pm

Re: MPG cable JST connector number?

Post by Centroid_Tech » Thu Jan 04, 2018 9:39 am

The manufacturer part number for the MPG connector is PADP-24V-1-S and you can order them here https://www.digikey.com/product-detail/ ... ND/1300227 while the manufacturer part number for the pins for that connector is SPH-001T-P0.5L and you can order them here https://www.digikey.com/products/en?key ... -2147-2-ND.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest