Page 1 of 1

Stock Keypad Icons for Lathe One Shots

Posted: Thu Dec 28, 2017 9:27 pm
by tblough
Does anyone have any keypad icons for the lathe one-shot routines? I'm going to label my Aux keys and I was just hoping someone had icons for Chamfer, Turning, Facing, Radius, and Drill one shots. I have the icons below for the mill one-shots and was hoping there were some lathe ones floating about.
Mill Jog Panel Custom Overlay.jpg

Re: Stock Keypad Icons for Lathe One Shots

Posted: Sat Dec 30, 2017 3:30 pm
by tblough
Alright. Here are the icons I came up with - still hoping someone has something better:
Icons.png
Individual icons are in the ZIP attached. They look pretty good when scaled to 1/2"x1/2" and printed on my Brady label maker. Need to get some 1/2" Black on Clear labels and then I'll post a photo of them on the lathe control.

Re: Stock Keypad Icons for Lathe One Shots

Posted: Sun Dec 31, 2017 11:56 pm
by frijoli
I really like this idea.

Clay

Re: Stock Keypad Icons for Lathe One Shots

Posted: Thu Jan 04, 2018 4:29 pm
by tblough
Here's the completed one shot icon labels. I also printed a white on clear label for the work light.
One Shot Icons.jpg

Re: Stock Keypad Icons for Lathe One Shots

Posted: Thu Jan 04, 2018 9:09 pm
by toolmaker101
Golly my lathe dose not have that one shot option that I know of is this a custom program?

Re: Stock Keypad Icons for Lathe One Shots

Posted: Thu Jan 04, 2018 11:20 pm
by tblough
Toolmaker, you have them, you just need to turn them on. Check your Centroid operators manual, chapter 14, and look at parameters 188-199 to set your aux key functions.

The worklight was a custom PLC mod, but easy enough if you are interested.

Re: Stock Keypad Icons for Lathe One Shots

Posted: Sat Jan 06, 2018 2:04 pm
by toolmaker101
This is so cool I have had my mill for over 14 years and lathe for 10 and never new this. :lol: :D