Stock Keypad Icons for Lathe One Shots

_______________________________________________________














LOGIN below to POST your questions and comments on AjaxCNC products.

Moderator: cnckeith

Post Reply
tblough
Posts: 115
Joined: Tue Mar 22, 2016 10:03 am
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: No
System Serial Number: 100505
100327
102696
Location: Boston, MA
Contact:

Stock Keypad Icons for Lathe One Shots

Post by tblough » Thu Dec 28, 2017 9:27 pm

Does anyone have any keypad icons for the lathe one-shot routines? I'm going to label my Aux keys and I was just hoping someone had icons for Chamfer, Turning, Facing, Radius, and Drill one shots. I have the icons below for the mill one-shots and was hoping there were some lathe ones floating about.
Mill Jog Panel Custom Overlay.jpg
Cheers,

Tom
Confidence is the feeling you have before you fully understand the situation.

tblough
Posts: 115
Joined: Tue Mar 22, 2016 10:03 am
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: No
System Serial Number: 100505
100327
102696
Location: Boston, MA
Contact:

Re: Stock Keypad Icons for Lathe One Shots

Post by tblough » Sat Dec 30, 2017 3:30 pm

Alright. Here are the icons I came up with - still hoping someone has something better:
Icons.png
Individual icons are in the ZIP attached. They look pretty good when scaled to 1/2"x1/2" and printed on my Brady label maker. Need to get some 1/2" Black on Clear labels and then I'll post a photo of them on the lathe control.
Attachments
LatheIcons.zip
(51.43 KiB) Downloaded 4 times
Cheers,

Tom
Confidence is the feeling you have before you fully understand the situation.

frijoli
Posts: 348
Joined: Tue Sep 12, 2017 10:03 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: No
CPU10 or CPU7: No
System Serial Number: none yet
Location: Outside Winston-Salem, NC

Re: Stock Keypad Icons for Lathe One Shots

Post by frijoli » Sun Dec 31, 2017 11:56 pm

I really like this idea.

Clay
Outside Winston-Salem, NC

tblough
Posts: 115
Joined: Tue Mar 22, 2016 10:03 am
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: No
System Serial Number: 100505
100327
102696
Location: Boston, MA
Contact:

Re: Stock Keypad Icons for Lathe One Shots

Post by tblough » Thu Jan 04, 2018 4:29 pm

Here's the completed one shot icon labels. I also printed a white on clear label for the work light.
One Shot Icons.jpg
Cheers,

Tom
Confidence is the feeling you have before you fully understand the situation.

toolmaker101
Posts: 16
Joined: Tue Dec 26, 2017 11:16 am
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: Yes
System Serial Number: 102978, 8121, REV233

Re: Stock Keypad Icons for Lathe One Shots

Post by toolmaker101 » Thu Jan 04, 2018 9:09 pm

Golly my lathe dose not have that one shot option that I know of is this a custom program?

tblough
Posts: 115
Joined: Tue Mar 22, 2016 10:03 am
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: No
System Serial Number: 100505
100327
102696
Location: Boston, MA
Contact:

Re: Stock Keypad Icons for Lathe One Shots

Post by tblough » Thu Jan 04, 2018 11:20 pm

Toolmaker, you have them, you just need to turn them on. Check your Centroid operators manual, chapter 14, and look at parameters 188-199 to set your aux key functions.

The worklight was a custom PLC mod, but easy enough if you are interested.
Cheers,

Tom
Confidence is the feeling you have before you fully understand the situation.

toolmaker101
Posts: 16
Joined: Tue Dec 26, 2017 11:16 am
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: Yes
System Serial Number: 102978, 8121, REV233

Re: Stock Keypad Icons for Lathe One Shots

Post by toolmaker101 » Sat Jan 06, 2018 2:04 pm

This is so cool I have had my mill for over 14 years and lathe for 10 and never new this. :lol: :D

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests