Run Time Graphics

_______________________________________________________














LOGIN below to POST your questions and comments on AjaxCNC products.

Moderator: cnckeith

Post Reply
danny
Posts: 14
Joined: Thu May 22, 2014 4:51 am
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: No
System Serial Number: 0329160186

Run Time Graphics

Post by danny » Tue Dec 19, 2017 6:17 am

Hello !
Im Just doing the last finishing touches on my mazak lathe retrofit with oak board and i ran a small program to test the machine .
All looks great but the run time graphics come up as they should but its not showing the Trail , i tried F9 on and off but no change !!
Any ideas anyone ?

Thanks

cnckeith
Posts: 520
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
System Serial Number: none
Contact:

Re: Run Time Graphics

Post by cnckeith » Tue Dec 19, 2017 10:09 am

zero tool diameter?

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests