Looking for a wiring schematic for the legacy servo3IO

_______________________________________________________














LOGIN below to POST your questions and comments on AjaxCNC products.

Moderator: cnckeith

Post Reply
the1depot
Posts: 6
Joined: Tue Feb 19, 2013 4:08 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
System Serial Number: A2001675520

Looking for a wiring schematic for the legacy servo3IO

Post by the1depot » Sat Dec 09, 2017 11:18 pm

I have a Milling machine with a servo3io. When I purchased the control there was a connection drawing and installation manual. I have looked everywhere and cannot find the documents. The website had these years ago, but they are no longer available for download. Are they available?

Thank You

diycncscott
Posts: 663
Joined: Thu Mar 04, 2010 4:03 pm

Re: Looking for a wiring schematic for the legacy servo3IO

Post by diycncscott » Sun Dec 10, 2017 10:41 am

Your serial number/system id invalid. If you could post a report or the correct system id, I will post the correct schematic for you system.

In the meantime, I've attached an ATC schematic that should include most of the information you need (and probably a lot more).

here:
atc3_dc3io.zip
(909.89 KiB) Downloaded 33 times

Centroid_Tech
Posts: 156
Joined: Thu Mar 18, 2010 2:24 pm

Re: Looking for a wiring schematic for the legacy servo3IO

Post by Centroid_Tech » Wed Dec 13, 2017 2:12 pm

Scott accidentally sent you a schematic for a DC3IO not a SERVO3IO. I don't know why he sent you an ATC schematic. Did you inform him that your machine has an ATC? He is correct in that if you can provide us with a current report from the system, we will be able to provide you with the schematic that shipped out of Centroid with that system. Attached is a basic SERVO3IO schematic.
Attachments
K0100109_M400S_Generic_Inverter_230VAC.pdf
(196.26 KiB) Downloaded 12 times

the1depot
Posts: 6
Joined: Tue Feb 19, 2013 4:08 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
System Serial Number: A2001675520

Re: Looking for a wiring schematic for the legacy servo3IO

Post by the1depot » Mon Dec 18, 2017 8:52 pm

Thank you for the information. This was very helpful to getting the machine back on the air again. All is good now. There is no ATC on this Milling Machine. I have a DC3IO that does have a tool changer. It is working fine. So both drawings are great to have. SYS ID: XJGFHDGIEF (0929040236) SERIAL# A2001675520. This is what is on the Options Screen

Centroid_Tech
Posts: 156
Joined: Thu Mar 18, 2010 2:24 pm

Re: Looking for a wiring schematic for the legacy servo3IO

Post by Centroid_Tech » Tue Dec 19, 2017 1:07 pm

The attached schematic shipped out with that system, A50026, which is just the basic wiring schematic. You can use this schematic or the previous one I attached.
Attachments
SERVO3IO.pdf
(83.52 KiB) Downloaded 12 times

the1depot
Posts: 6
Joined: Tue Feb 19, 2013 4:08 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
System Serial Number: A2001675520

Re: Looking for a wiring schematic for the legacy servo3IO

Post by the1depot » Wed Dec 20, 2017 10:34 am

Thank You

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest