Supermax YCM-40 All in One DC Retrofit

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Supermax YCM-40 All in One DC Retrofit

Post by martyscncgarage »

I've been working on this one for a little while. It was rescued from a building where they made orthodics. It appears to have just done nothing but plastics and molds all its life. Y axis thrust bearing pocket was broken out at least twice in its lifetime. I think I have that problem licked now.
Installing a Centroid All in One DC
Progress pictures can be seen here: https://goo.gl/photos/vvkoRQDtuLiGQRUE8



Video series can be followed on my YouTube channel, martyscncgarage, just look for the Supermax YCM-40 play list.
https://www.youtube.com/watch?v=LECdN0w ... hcqgXeZBxG
Hope to have it completed by the end of the month.
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
Post Reply