Running backwards (resolved)

_______________________________________________________














LOGIN below to POST your questions and comments on AjaxCNC products.

Moderator: cnckeith

Post Reply
Anthony
Posts: 4
Joined: Thu Nov 30, 2017 12:50 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: No
CPU10 or CPU7: No
System Serial Number: (0616102337)

Running backwards (resolved)

Post by Anthony » Thu Nov 30, 2017 12:55 pm

When I push x-label goes left y+ table moves foward .120 vac I just purchased used any help?

Centroid_Liviu
Posts: 267
Joined: Mon Jul 18, 2011 9:57 am
Allin1DC CNC Controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
System Serial Number: none

Re: Running backwards

Post by Centroid_Liviu » Thu Nov 30, 2017 1:04 pm

Please attached a current report of your system. From the Main Menu Press F7 Utilities, and then F7 Report.

viewtopic.php?f=60&t=1043

martyscncgarage
Posts: 490
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: No
System Serial Number: none
Location: Mesa, AZ

Re: Running backwards

Post by martyscncgarage » Fri Dec 01, 2017 12:18 pm

Anthony wrote:
Thu Nov 30, 2017 12:55 pm
When I push x-label goes left y+ table moves foward .120 vac I just purchased used any help?
What controller are you using? Acorn, All in One DC Oak?
Need more info on your setup.
Centroid Liviu asked for your report file, here are instructions to generate it:
viewtopic.php?f=60&t=943&p=4312&hilit=report#p4312
"Jack of all trades, master of none!"
Mesa, AZ

Centroid_Tech
Posts: 131
Joined: Thu Mar 18, 2010 2:24 pm

Re: Running backwards

Post by Centroid_Tech » Fri Dec 01, 2017 12:30 pm

Based on their serial number of the control, this is an old Centroid CNCDRO control. It sounds like the control wasn't properly setup but that is why we need a current report from the system to see how the system is setup.

martyscncgarage
Posts: 490
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: No
System Serial Number: none
Location: Mesa, AZ

Re: Running backwards

Post by martyscncgarage » Fri Dec 01, 2017 12:37 pm

Centroid_Tech wrote:
Fri Dec 01, 2017 12:30 pm
Based on their serial number of the control, this is an old Centroid CNCDRO control. It sounds like the control wasn't properly setup but that is why we need a current report from the system to see how the system is setup.
My apologies. You were providing HIM with a report you had on file.
Marty
"Jack of all trades, master of none!"
Mesa, AZ

Anthony
Posts: 4
Joined: Thu Nov 30, 2017 12:50 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: No
CPU10 or CPU7: No
System Serial Number: (0616102337)

Re: Running backwards

Post by Anthony » Fri Dec 01, 2017 12:50 pm

Thanks I fixed the axis moving backwords.
It is a cnc10 I tried to create a report like in the video but that is windows and this is not . It's on a used kneemill that's about all the info I have .or can locate at this time .
It had a dead cmos batery and now I'm in demo mode any sugestions?

Centroid_Tech
Posts: 131
Joined: Thu Mar 18, 2010 2:24 pm

Re: Running backwards

Post by Centroid_Tech » Fri Dec 01, 2017 1:25 pm

A dead CMOS battery shouldn't cause the control to be locked out of the CNC10 software. Please email us a current report from that system. Whether you have a Windows or Linux or DOS system, generating a report is pretty much the same. The only time it's different is on the older DOS systems because either the report function didn't copy all of the necessary files or the report function wasn't even supported. Perhaps the attached tech bulletin will help in generating a report.
Attachments
193 Generating Report.pdf
(5.58 KiB) Downloaded 3 times

Anthony
Posts: 4
Joined: Thu Nov 30, 2017 12:50 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: No
CPU10 or CPU7: No
System Serial Number: (0616102337)

Re: Running backwards

Post by Anthony » Fri Dec 01, 2017 2:54 pm

I attached the files
Attachments
report.txt
(92.34 KiB) Downloaded 3 times
report.zip
(29.66 KiB) Downloaded 2 times

Centroid_Tech
Posts: 131
Joined: Thu Mar 18, 2010 2:24 pm

Re: Running backwards

Post by Centroid_Tech » Fri Dec 01, 2017 4:26 pm

Looking at the report, you do have permanent unlocks entered. Please verify that on the Options, it shows Permanent Unlock and Intercon as highlighted in green and that they say ON to the left of the option. If it does, then you have nothing to worry about as when the DEMO expires, those features will remain on. The report shows that it was generated on January 3, 2009. Please make sure that you correctly set the date and time in the BIOS settings. You can get to the BIOS settings by pressing the DEL key as soon as you power the system up.

Anthony
Posts: 4
Joined: Thu Nov 30, 2017 12:50 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: No
CPU10 or CPU7: No
System Serial Number: (0616102337)

Re: Running backwards

Post by Anthony » Fri Dec 01, 2017 5:12 pm

Thank you for your help :D

Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests