Offline version of INTERCON Number 2

_______________________________________________________














LOGIN below to POST your questions and comments on AjaxCNC products.

Moderator: cnckeith

Post Reply
lilb93
Posts: 65
Joined: Mon Nov 06, 2017 10:26 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: Yes
System Serial Number: 0216041209
Contact:

Offline version of INTERCON Number 2

Post by lilb93 » Tue Nov 14, 2017 6:13 pm

Got in I guess is the dongle, where do you find the software???? Tried tech support they said they will call back. But when is the question.. :oops:

Centroid_Tech
Posts: 131
Joined: Thu Mar 18, 2010 2:24 pm

Re: Offline version of INTERCON Number 2

Post by Centroid_Tech » Tue Nov 14, 2017 6:43 pm

You can download the latest CNC11 v3.16 software here http://www.centroidcnc.com/centroid_diy ... loads.html. When you get to the section where it asks you what you want to install, select either the Mill or Lathe DEMO. That is the Offline Intercon software. Do you happen to know who you spoke with in tech support? Do you happen to know what your control serial number is as there may be a chance that there will be a backwards compatibility issue between the Offline Intercon v3.16 and whatever version of Intercon you have running on your control.

lilb93
Posts: 65
Joined: Mon Nov 06, 2017 10:26 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: Yes
System Serial Number: 0216041209
Contact:

Re: Offline version of INTERCON Number 2

Post by lilb93 » Tue Nov 14, 2017 6:49 pm

0216041209 Thats what is on the main screen tried to run it on XP says not a valid win32 application.

Centroid_Tech
Posts: 131
Joined: Thu Mar 18, 2010 2:24 pm

Re: Offline version of INTERCON Number 2

Post by Centroid_Tech » Wed Nov 15, 2017 9:38 am

For future reference, your Centroid control serial number is 3606. Our database shows that system is running CNC10 v2.36. In order to avoid backwards compatibility issues, I will email you the Offline Intercon v2.36 via filemail.com as I can't attach it due to its size. It is Windows XP compatible. That particular version of Offline Intercon is not, however, Windows 7, 8, or 10 compatible.

Post Reply

Who is online

Users browsing this forum: No registered users and 16 guests