DC servo compatible

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
Dennis23t
Posts: 6
Joined: Wed Oct 25, 2017 6:17 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC11: No
CPU10 or CPU7: No

DC servo compatible

Post by Dennis23t »

I am seriously wanting to update my mhp mill. Will this motor work with the all in one.
Attachments
IMG_20171024_211640684.jpg
cnckeith
Posts: 7164
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: DC servo compatible

Post by cnckeith »

Hello. well the allin1dc can run a motor of that size.. but with the brushes out (seen in photo) I would not reuse that motor unless it was rebuilt by a qualified servo motor repair shop.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Post Reply