**RESOLVED** ajaxplugin config on mach
Moderator: cnckeith
-
- Posts: 50
- Joined: Thu Jun 03, 2010 2:25 pm
- Allin1DC CNC Controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
- Location: Cleveland, Ohio
**RESOLVED** ajaxplugin config on mach
when I go to CONFIG>CONFIG PLUGINS, then try to open ajaxplugin by hitting the yellow button nothing happens. The green check box is enabled to the left but still no response. I have uninstalled mach and ajax plugin many times with the same results. The copy of mach is a demo versionR3.042.040. Is this not compatable?
-
- Posts: 11
- Joined: Sat Jun 05, 2010 12:54 am
- Allin1DC CNC Controller: No
- CNC Control System Serial Number: A900078
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: No
Re: ajaxplugin config on mach
you may need the Microsoft .net framework software.
here is link
http://www.microsoft.com/downloads/deta ... laylang=en
I had similar problem and this fixed it
jh
here is link
http://www.microsoft.com/downloads/deta ... laylang=en
I had similar problem and this fixed it
jh
-
- Posts: 50
- Joined: Thu Jun 03, 2010 2:25 pm
- Allin1DC CNC Controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
- Location: Cleveland, Ohio
Re: ajaxplugin config on mach
Many thanks! That was it.