Bridgeport Boss R2E3 Series II new to me project: Introduction
Posted: Tue Sep 26, 2017 9:25 pm
Hello All,
My name is Randy and have been lurking around this forum and decided, time to join.
I have a project mill, that I am wanting to upgrade to allin1.
This is new to me project, I don't have much experience, but willing to try and learn how to do the task at hand.
Mill originally had stepper system; then was converted to dynopath, pulled from a Cheveler machine. Previous owner stated it had an over travel alarm on Z, but could never get it to reset out of alarm mode.
it has SES motors XYZ.
a few current pics links
https://www.dropbox.com/s/fx0sn5ko3v6p9 ... 2.jpg?dl=0
https://www.dropbox.com/s/ezeaxgv1iggvb ... 8.jpg?dl=0
https://www.dropbox.com/s/utzlwoo29uzpl ... 7.jpg?dl=0
https://www.dropbox.com/s/ywij7w6boah96 ... 4.jpg?dl=0
I will probably put on a different cabinet, happen to have a nice empty control box from a series 1 boss machine.
Will try and make a clean, nice control box layout.
Will be looking for help along the path, Marty has already helped me and his videos are great!!
Oh ya, trying to do on a budget, so will be scrounging around for deals.
Cheers
My name is Randy and have been lurking around this forum and decided, time to join.
I have a project mill, that I am wanting to upgrade to allin1.
This is new to me project, I don't have much experience, but willing to try and learn how to do the task at hand.
Mill originally had stepper system; then was converted to dynopath, pulled from a Cheveler machine. Previous owner stated it had an over travel alarm on Z, but could never get it to reset out of alarm mode.
it has SES motors XYZ.
a few current pics links
https://www.dropbox.com/s/fx0sn5ko3v6p9 ... 2.jpg?dl=0
https://www.dropbox.com/s/ezeaxgv1iggvb ... 8.jpg?dl=0
https://www.dropbox.com/s/utzlwoo29uzpl ... 7.jpg?dl=0
https://www.dropbox.com/s/ywij7w6boah96 ... 4.jpg?dl=0
I will probably put on a different cabinet, happen to have a nice empty control box from a series 1 boss machine.
Will try and make a clean, nice control box layout.
Will be looking for help along the path, Marty has already helped me and his videos are great!!
Oh ya, trying to do on a budget, so will be scrounging around for deals.
Cheers