Search found 669 matches
- Wed Nov 03, 2021 2:52 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Software Part Design and G-Code Options
- Replies: 5
- Views: 1633
Re: Software Part Design and G-Code Options
First issue: Most CAD programs just need a post processor to make G-Code that will run on a Centroid machine. The post processor just needs to be a post processor made for your machine. For example, a post processor that makes g-Code for Mach 3 does not run on a Centroid machine. Second issue: Learn...
- Tue Oct 12, 2021 9:22 am
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: Found the limits of pushing the computer
- Replies: 5
- Views: 2668
Re: Found the limits of pushing the computer
I have a Honda Gold Wing that will do 125MPH (Limited at that speed) but I don't feel the need to push it till it breaks just to see if I can break it. There are best practices for good reliable CNC results and then there are practices that make machines unreliable. I think you have described a lot ...
- Sun Sep 26, 2021 3:03 pm
- Forum: Centroid Acorn CNC Controller
- Topic: upgrade lathe
- Replies: 9
- Views: 2243
Re: upgrade lathe
That is a manual lathe. To get any kind of accuracy, you would need to upgrade it to ballscrews. That entails making mounts, installing angular contact bearings etc. Along with fitting the correct size motors. I never recommend converting a manual lathe because of all the work it entails I second t...
- Sun Aug 29, 2021 3:36 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Analog output/ VFD problem
- Replies: 14
- Views: 3289
Re: Analog output/ VFD problem
Incredible!
Thanks for the explanation and the diagrams.
Never to old to learn something new!
Dave C.
Thanks for the explanation and the diagrams.
Never to old to learn something new!
Dave C.
- Sun Aug 29, 2021 12:33 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Analog output/ VFD problem
- Replies: 14
- Views: 3289
Re: Analog output/ VFD problem
Add the capacitor across the analog pair, as Tom suggested above. I'm happy to hear that this solved the problem but can anyone explain WHY this worked? What's the principal here? Is it a noise issue, impedance matching issue? It's hard to learn new things and apply them to future problems if all w...
- Fri Aug 27, 2021 9:18 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Analog output/ VFD problem
- Replies: 14
- Views: 3289
Re: Analog output/ VFD problem
When I disconnect from the drive I get a totally fine output 0% is 0v 50% is 5v and 10v is 100%, the trouble begins by connecting to the vfd. If i disconnect the drive and test the drive with a potentiometer, also totally fine, so it is the combination of the two that makes the problem. Glenn Your ...
- Fri Aug 27, 2021 3:42 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Analog output/ VFD problem
- Replies: 14
- Views: 3289
Re: Analog output/ VFD problem
One more test:
Disconnect Acorn 0-10v output from the drive and do this.
Command the speed to 0 and then read the 0-10vdc output terminals.
Command the speed to 50% and do the same.
Now try 100% and test it again.
What do you get?
Dave C.
Disconnect Acorn 0-10v output from the drive and do this.
Command the speed to 0 and then read the 0-10vdc output terminals.
Command the speed to 50% and do the same.
Now try 100% and test it again.
What do you get?
Dave C.
- Fri Aug 27, 2021 2:50 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Analog output/ VFD problem
- Replies: 14
- Views: 3289
Re: Analog output/ VFD problem
According to all the Fulti-Function inputs the drive is the source of the control circuit for S1-S5 as they are drawn with just a contact to close the circuit. Meaning no external voltage needed to activate these 5 inputs. See page 3.21. This does not affect the AVI input! (AVI= Analog Voltage Input...
- Fri Aug 27, 2021 11:15 am
- Forum: Centroid Acorn CNC Controller
- Topic: Analog output/ VFD problem
- Replies: 14
- Views: 3289
Re: Analog output/ VFD problem
It is possible that the drive is set to "sourcing" and is providing voltage to the Acorn board which is also providing a signal to the drive. Try setting the drive to "sinking" and see if the problem goes away. If my memory is still working, and some days it isn't, a device set t...
- Thu Aug 26, 2021 2:12 pm
- Forum: Centroid Acorn CNC Controller
- Topic: jerky movement when in the g code view.
- Replies: 25
- Views: 5731
Re: jerky movement when in the g code view.
It’s a 5x8 machine so I usually like to have my rapids set at at least 1500ipm. Just want to clarify that with the new PC that I won’t have any problems with the acorn software license. Do I just do it the same as I did the first time? Thank you Bill The licenses is tied to the Acorn board itself a...