Centroid Community CNC Support Forum

All Acorn boards are tested before they leave. How did you test Ether1616? How was it mounted? Pictures? NOTHING was connected other than Power Supply? Have you tested the power supply to make sure it is GOOD? Put a 24VDC load on it? Perhaps temporarily swap it with the Meanwell Power supply that ca...

Yes it was perfectly functioning thats why im trying to get it back 'online' haha. max speed was 24000 so ill enter that in. What should I put for the minimum speed? It was default at 300 Then enter 300 I meant the CNC12 Wizard had 300 as default That's dependant on your spindle motor. What kind is...

It's being Beta tested refined now....patience
Marty

There are label makers that can print in heat shrink tubing. I have one called Rhino 4200 I believe it's made by Dyno. Reasonable cost (I found mine on eBay) and labels are readily available on Amazon

Ok great. Are there any good write ups on how to configure your spindle? I have the specs from my cnc manufacturer but I can't really figure out what I need to put in the wizard. If you know any good posts on here, or videos Id be more than happy to check them out. Was this a functional machine bef...

Yep I got the motor tuned perfectly and rigid tapping is working great Please post a video up on YouTube, share a link in the Success Stories forum. Share the make and model of the drive you used. Share the wiring connections used. Share the parameter settings you entered in the drive Post a fresh ...

Ok great. Are there any good write ups on how to configure your spindle? I have the specs from my cnc manufacturer but I can't really figure out what I need to put in the wizard. If you know any good posts on here, or videos Id be more than happy to check them out. Was this a functional machine bef...

Common terminal for relay 1 is Y1B. You should have continuity between Y1B and Y1C when the power is off and Y1B and Y1A when the relay is energized. Relay #2 is normally open between Y2A and Y2B. There is no Y3 in either the terminal listing in the manual or the photo above. Apologies I mean I tes...

Please take a picture of the VFD showing its terminals and upload it here The Chinese manual is terrible, shows NO diagram of the VFD and its connections From page 11 of your manual: Page 11.JPG Great manual. (SARCASM) With the VFD powered OFF, Run a continuity test from Y1A to Y1B and Y1A to Y1C. I...

Hi Tom I sent you a PM on this. Your turret is a Denford DM-08 rather than a Baruffaldi and should be manageable within the current ATC/turret wizard. I am currently sorting a Mirac PC with the same turret. Hi Kfm, Thank you for getting in contact with me, I've replied to your message. Luckily you ...