Centroid Community CNC Support Forum

Very nice work Henry!
Marty

Nice!
What do they use to layout the parts and create the G code? Just curious Aamir
Marty

Can't go wrong with Delta, Yaskawa, Automation Direct GS series.

I am back up and running for the moment, I looked in the control box and found the ethernet cable was badly kinked, replaced it, and now it seems to be functioning properly. Fingers crossed it was that simple. Not likely the Ethernet cable. More likely a poor connection As I suggested in Facebook d...

When I press Run F4 it prompts me to cycle start. When I press cycle star an error sign pops up in the message window that reads "501 invalid character, line 1". In the manual it says 501 is an "Invalid character on CNC line". The recomended action is to "Remove character f...

Outstanding. Acorn running a VMC. Can you summarize the build, drives/motors, VFD/Spindle Motor

mccue.sc wrote: ↑Thu Jan 26, 2023 8:36 pm I also parried the axis to the x and it now jogs as normal

What?
Clarify.
Are you saying you reconnected X back to axis 1 on Acorn and it's working now?

Possibly one of the cables got nicked/cut when running them through the bulkhead and is now shorting out somehow? Just a wild guess but these things happen. Agreed. He needs to see what caused damage to the Acorn DIR output. Miswired or a short....That's why I suggested he check his wiring. Acorn's...

moved x wiring over to 4th axis would not allow me to name it x but called it a axis and it works as should looks like I have lost x axis or #1 axis do you happen to know if I can change anything else to get it to read x and not a for now it will only be a 3 axis mill? Did you change it from a rota...

When did you buy the board?