Centroid Community CNC Support Forum

vtcnc wrote: ↑Wed Oct 13, 2021 9:50 am Is there an update on this?

What sort of update are you looking for? Do you have an issue yourself? If so, create a new post with the details following this thread:
viewtopic.php?f=60&t=1043

Why couldn't all of the ZRI's be or'd together into one input? Just like the home switches all ganged together. Each axis backs off from home following the home command, correct? This allows the next axis to use both common inputs, home switch and the ZRI marker. To do it right, you use a mechanica...

+PUL to DB25 STEP
+Dir to DB25 DIR
-PUL to DB25 Pin 18-25 (COM)
-DIR to DB25 Pin 18-25 (COM)

IGNORE the ENA. The drive should be enabled by default.

Buy the DB25 male breakout board from Amazon

2F1FB934-762F-4B09-B162-ACD5C02EB243.jpeg331B2897-32EB-4D3E-88C3-23396FF447AA.jpegI found this page on my driver I’ve been researching all weekend on these drives. It looks as though there are 2 common ways of hooking up drives I found this quote The centroid Acorn works with and motor that accepts...

Hi all, I need help. I was running a G83 cycle and all of a sudden my Z Axis moves in the + direction only when either a + or - direction is commanded. The led indicator in the Acorn board is red. I hve triple checked all connections with no luck. I am running a CL86T driver from stepperonline. Did...

Connect the drive to the DB25 connector and try it.
Based on the cut sheet you posted in the first post, it is a +5dc logic drive.
It asks for resistors to be installed if voltages are higher than 5VDC

If you can export to .dxf you don't really need anything expensive for Plasma in my opinion. Get something and start with it.

What software do you recommend me? I know fusion360 but can you recommend me another? You understand you need CAD to design the part. Then you export the file to CAM to create the Gcode correct? Most times, it's not the same software package that does both. Plasma is 2D so from a CAD stand point, y...

Make sure you are supplying the correct forward and reverse voltage for your machine.