Search found 89 matches
- Fri May 25, 2018 10:55 am
- Forum: Centroid Acorn CNC Controller
- Topic: How to change the direction on New pendant
- Replies: 10
- Views: 3582
How to change the direction on New pendant
Hi i bought one of the new wireless pendant , i have a lathe and the x axis is reversed ,is there a file or parameter to change this?
- Sun Apr 22, 2018 12:30 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Z axis tool setting drills lathe <answered>
- Replies: 6
- Views: 2353
Re: Z axis tool setting drills lathe <answered>
Re: Z axis tool setting drills lathe Post by cnc_smith » Sat Apr 21, 2018 2:43 pm Your g-code program is not turning the offsets on the the tools that are called. First tool T13 calls out T1300. This calls out tool 13 with zero offset. The second tool T13 calls out T3500. This calls out tool 35 wit...
- Sat Apr 21, 2018 1:31 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Z axis tool setting drills lathe <answered>
- Replies: 6
- Views: 2353
Re: Z axis tool setting drills lathe
Here is the G code two tools first center drill and then jobber drill, see attached G code file.
- Thu Apr 19, 2018 11:54 am
- Forum: Centroid Acorn CNC Controller
- Topic: Z axis tool setting drills lathe <answered>
- Replies: 6
- Views: 2353
Re: Z axis tool setting drills lathe
As you requested
- Tue Apr 17, 2018 2:44 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Z axis tool setting drills lathe <answered>
- Replies: 6
- Views: 2353
Z axis tool setting drills lathe <answered>
I am having a problem with drills not getting the right offset, i used a tool setter to get accuracy and touched of set z reference first tool and then measure tool (x and z ). Set next tool # 2 jog to same setting with tool two , press measure tool z offset and x offset as it described in the manua...
- Sat Apr 14, 2018 1:25 pm
- Forum: Centroid Acorn CNC Controller
- Topic: problem solved
- Replies: 8
- Views: 2394
Re: Run away ! when jogging incremental mode/ resolved
Issue resolved
- Sat Apr 14, 2018 1:24 pm
- Forum: Centroid Acorn CNC Controller
- Topic: problem solved
- Replies: 8
- Views: 2394
Re: Run away ! when jogging incremental mode
Please post information on the drive types, which schematic did you follow, and please post a report. so we can help you. The Acorn doesn't run away😁.. when it does happen, it sometimes related to the touch screen having dirt or grease on it or it sounds more likely in your case that it's drive rel...
- Fri Apr 13, 2018 5:59 pm
- Forum: Centroid Acorn CNC Controller
- Topic: problem solved
- Replies: 8
- Views: 2394
Re: Run away ! when jogging incremental mode
I have one but i do not use the touch screen i was using the mouse every time it did this ,the screen is a Asus model Vt 207.
- Fri Apr 13, 2018 5:41 pm
- Forum: Centroid Acorn CNC Controller
- Topic: problem solved
- Replies: 8
- Views: 2394
problem solved
I am having a issue with the jogging running away when in incremental mode ,you press the jog button a couple of time say jogging .001 at a time and all of a sudden the Z axis will go at max speed and slam into the chuck. Demolished a brand new tool setter, it took the brunt of the run away , i was ...
- Thu Apr 05, 2018 10:34 am
- Forum: Centroid Acorn CNC Controller
- Topic: Threading problem lathe
- Replies: 46
- Views: 13887
Re: Threading problem lathe
Re: Threading problem lathe Unread post by ScotY » Wed Apr 04, 2018 3:32 pm Thanks for the info, that’s good news on both parts! Do you know what the solution was to make the motor encoder work? Was it just the missing ground on the encoder cable and did you mean the shield ground? Would be nice to...