Search found 346 matches
- Wed Dec 13, 2023 5:03 am
- Forum: Centroid Acorn CNC Controller
- Topic: How I use TTO an Probe with Acorn mill
- Replies: 4
- Views: 1552
Re: How I use TTO an Probe with Acorn mill
I see you are using CNC12's to set tool heights and not the Probe App tool library manager. I was trying to use Probe app to set tool heights. Maybe that was my problem. Yesterday I ran a program with 3 tool changes and all worked perfect. Thanks again Uwe. Now I feel like maybe I should have sent t...
- Wed Dec 13, 2023 4:58 am
- Forum: Centroid Acorn CNC Controller
- Topic: Setting tool height problems
- Replies: 6
- Views: 2114
Re: Setting tool height problems
I use Z Home as Z ref P#3=6 To set the probe length, I use a gage with exact the length at which my TT trips. Uwe Thank you for the video. I set P 3 to 6 and all seems to work now. I had tried setting it to two but it kept getting reset to 0 asking for CNC12 to be restarted. There is no 6 mentioned...
- Mon Dec 11, 2023 9:48 am
- Forum: Centroid Acorn CNC Controller
- Topic: Setting tool height problems
- Replies: 6
- Views: 2114
- Mon Dec 11, 2023 8:48 am
- Forum: Centroid Acorn CNC Controller
- Topic: Setting tool height problems
- Replies: 6
- Views: 2114
Setting tool height problems
From the beginning I have had problems setting tool heights correctly. I am 100% sure it is something I am doing wrong. Some setting that is messing with me. I have Swissi's probe app. I have a fixed tool height setter and a touch probe. Recently I read on here that parameter 3 should be set to 2. I...
- Fri Dec 08, 2023 10:06 am
- Forum: Machining Strategies. Work Holding, Tool Path, Cutters, Feeds/Speeds etc.
- Topic: Swissi's post processor not compatible with two setups?
- Replies: 13
- Views: 12191
Re: Swissi's post processor not compatible with two setups?
Would you post your macro's so I can see how you accomplished it?
- Fri Dec 08, 2023 5:59 am
- Forum: Machining Strategies. Work Holding, Tool Path, Cutters, Feeds/Speeds etc.
- Topic: Swissi's post processor not compatible with two setups?
- Replies: 13
- Views: 12191
Re: Swissi's post processor not compatible with two setups?
I spoke to soon as to the manual stop. I tried a test program with a manual stop inserted and the program doesn't stop. It goes directly to the next operation. I am trying to run one side of a part and then flip it and run the same toolpath on the flip side. When I do this it just starts the second ...
- Wed Dec 06, 2023 12:59 pm
- Forum: Machining Strategies. Work Holding, Tool Path, Cutters, Feeds/Speeds etc.
- Topic: Swissi's post processor not compatible with two setups?
- Replies: 13
- Views: 12191
Re: Swissi's post processor not compatible with two setups?
I found the manual stop under the setup tab. That part solved.
- Wed Dec 06, 2023 12:49 pm
- Forum: Machining Strategies. Work Holding, Tool Path, Cutters, Feeds/Speeds etc.
- Topic: Swissi's post processor not compatible with two setups?
- Replies: 13
- Views: 12191
Swissi's post processor not compatible with two setups?
I am making a part that will be machined on both sides. When the first side is finished I will flip the part. It will be located with dowel pins. How to I put a pause in the Fusion cam file between the two setups? When I post the file I get a message saying my post processor in not compatible with t...
- Fri Nov 24, 2023 8:50 am
- Forum: Centroid Acorn CNC Controller
- Topic: Fehlerbehebung bei RPi + mesa 7i76e + oyostepperde Schrittmotor
- Replies: 1
- Views: 700
Re: Fehlerbehebung bei RPi + mesa 7i76e + oyostepperde Schrittmotor
Hello Jerry. You are on the wrong forum for LinuxCNC. This is a forum exclusively for Centroid products.
- Sat Nov 18, 2023 12:24 pm
- Forum: Machining Strategies. Work Holding, Tool Path, Cutters, Feeds/Speeds etc.
- Topic: Digitize to milling with Rhino and fusion
- Replies: 8
- Views: 2670