Centroid Community CNC Support Forum

never get an answer at that number either. is there a time when i could get someone?

Oh by the way I purchased an hour of phone support. and the number you have listed isnt connected. how do I get a hold of phone support>?

I dont have a problem with the encoders. the DRO shows the distance when I move it by hand. my problem is the h14 and h13 dont enable the drive. when I apply 12v to the input 17 the h14 enable LED turns green. when I go to the I/O screen the output 17 on h14 turns green and the input13 turns green t...

When I did the benchtop test with everything hardwired with 12v the inputs were lit up, when I pressed m3 the outputs lighted up too. but now with the drives installed I'm trying to get it to enable the drives and it wont. the inputs dont light up. according to the diagram that you showed me http://...

I have a lathe in which I installed a ajax controller gpio4d mpu11 with centroid 11 program. used the motors on the machine and got A-M-C drives. the drives showed they were enabled even when the I/O screen showed they weren't. phoned amc tech support and got the information to invert the inhibit, n...