Search found 286 matches
- Mon Sep 24, 2018 9:09 am
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: Oak board with Estun Servo 410/411 errors
- Replies: 11
- Views: 4874
Re: Oak board with Estun Servo 410/411 errors
What happens when you try pressing F3(MDI)? If the same thing happens, try inverting the analog speed signals to the Estun drive. Out of curiosity, did you purchase the Estun OAK interface cables from Centroid or did you build your own?
- Tue Sep 18, 2018 10:23 am
- Forum: Acorn CNC Tech Tips Knowledge Base, Look Here! before posting
- Topic: Acorn ATC Overview....Updated 2-26-24
- Replies: 20
- Views: 50972
Re: Acorn ATC Overview
Please email support@centroidcnc.com with your TeamViewer ID and password so that I can log onto your system and see what's going on.
- Mon Sep 17, 2018 6:17 pm
- Forum: Acorn CNC Tech Tips Knowledge Base, Look Here! before posting
- Topic: Acorn ATC Overview....Updated 2-26-24
- Replies: 20
- Views: 50972
Re: Acorn ATC Overview
I'm glad that setting up the turret was easy. The virtual control should be working. Did you not use the Wizard to set all of your settings prior to getting the items for your turret? If not, then that explains why your VCP isn't working. All you have to do is set parameter 219 to 1 and then reboot ...
- Wed Sep 05, 2018 1:39 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: Glass Scales and motors disabled (Axis Free) *ANSWERED*
- Replies: 3
- Views: 1732
Re: Glass Scales and motors disabled (Axis Free)
When the axes are in a "free" state, the DRO follows the linear scales.
- Tue Sep 04, 2018 5:26 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: Need help re configuring PLC outputs
- Replies: 3
- Views: 2108
Re: Need help re configuring PLC outputs
What schematic are you following as based on Centroid's database, a schematic with filename S14471 was shipped out with your control and that schematic doesn't have any wiring for a tool changer? There was a point in which Centroid standardized all of the inputs and outputs on a system. That means t...
- Thu Aug 30, 2018 10:21 am
- Forum: Centroid Acorn CNC Controller
- Topic: Connecting Touch Probe and Tool Hight Measurement Plate to Acorn at the same time <answered>
- Replies: 8
- Views: 3649
Re: Connecting Touch Probe and Tool Hight Measurement Plate to Acorn at the same time
Based on your description, it sounds like the value of parameter 11 should be set to -50007. If the ProbeTripped input OPENS when it's tripped, then the value of parameter 11 should be a negative value. If the ProbeTripped input CLOSES when it's tripped, then the value of parameter 11 should be a po...
- Wed Jun 27, 2018 1:04 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Thermwood C53 5x10 Retrofit
- Replies: 18
- Views: 6942
Re: Thermwood C53 5x10 Retrofit
The ACORN software isn't using parameter 64 for that axis pairing feature. Are you stating that the system wasn't working originally and that by setting parameter 64 then it started working? Or are you just assuming that the settings in the Wizard should have set parameter 64 accordingly and because...
- Tue Jun 26, 2018 10:48 am
- Forum: Centroid Acorn CNC Controller
- Topic: Tool Library Offset -< Answered>
- Replies: 53
- Views: 18717
Re: Tool Library Offset
Thanks for that finding because I see exactly what is going on now. The G91.1 is not a valid G code in the Centroid controls. G91 is however, which places the control in Incremental mode. Your program as it is currently written is negating the affect of the G90, which places the control in Absolute ...
- Tue Jun 26, 2018 10:20 am
- Forum: Centroid Acorn CNC Controller
- Topic: aceeleration in .nc code
- Replies: 33
- Views: 10010
Re: aceeleration in .nc code
To put a reduction on my machine is to redesign it again and it is not viable, if you tell me that I can not put 126.5 or another larger value in overal turn ratio, I should get this control out. previously I used this equipment with mach3 and it worked perfectly it's a shame not being able to fix ...
- Tue Jun 26, 2018 9:38 am
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: Encoder Basics
- Replies: 66
- Views: 181066
Re: Encoder Basics
Can these encoders be added to existing steppers? As long as the drives that are moving those steppers can support the encoder feedback, I don't see a reason why you can't use them. You will need to check the drive's manual for the encoder specifications that it requires. The ACORN does not have an...