Search found 114 matches
- Fri Jan 24, 2014 11:54 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: Centroid at Grizzly!
- Replies: 4
- Views: 3113
Re: Centroid at Grizzly!
Grizzly called and said you have to buy the unlock codes from centroid when you buy their accessories at the same price centroid ells them for with the unlock codes. I don't think the Grizzly guy has much info on this LOL. Anyway - buy from the source is the message LOL.
- Tue Jan 21, 2014 6:02 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: 5.5.2 ALLIN1DC TESTING
- Replies: 8
- Views: 4052
Re: 5.5.2 ALLIN1DC TESTING
I ask a ton of questions too and I know your feeling for sure. Lots of people here to help get you (us) through whatever!
- Mon Jan 20, 2014 11:38 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: 5.5.2 ALLIN1DC TESTING
- Replies: 8
- Views: 4052
Re: 5.5.2 ALLIN1DC TESTING
Coming off the ATX power supply you have a number of power connectors. Measure with a volt meter set to DC. Yellow is typically 12V+ and Black is ground. Red is 5V+.
- Thu Jan 16, 2014 9:32 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: Centroid at Grizzly!
- Replies: 4
- Views: 3113
- Sat Jan 11, 2014 6:16 am
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: Adding to my tool library - correct procedure question
- Replies: 7
- Views: 3553
Re: Adding to my tool library - correct procedure question
CncKeith, Am I reading this correctly that I do NOT have to remeasure the tools at all as long as they do not change position in their holders or break. When I start a different job at a different knee height I can just set my part setup Z to zero with any of the measured tools, making sure to selec...
- Fri Jan 10, 2014 2:58 am
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: Video of my DIY Mist Coolant setup
- Replies: 1
- Views: 1676
Video of my DIY Mist Coolant setup
Made a DIY Mist Coolant setup this week. Here is a video of it if you want to see a home built one.
https://www.youtube.com/watch?v=bTRuDzdezbg
https://www.youtube.com/watch?v=bTRuDzdezbg
- Fri Jan 10, 2014 2:56 am
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: DIY Tool Touch off and code until I can afford a TT1??
- Replies: 6
- Views: 3762
Re: DIY Tool Touch off and code until I can afford a TT1??
Would that also do edge finding (homing X Y and Z) and center finding of a part?
- Wed Jan 08, 2014 7:58 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: Knee mill Low gear reversing on VFD
- Replies: 8
- Views: 5210
Re: Knee mill Low gear reversing on VFD
Great idea. I will check that out again tonight. Had forgot about that.
Do those switches get power typically? Never wired one before. (Maybe diagram shows that too?)
Do those switches get power typically? Never wired one before. (Maybe diagram shows that too?)
- Wed Jan 08, 2014 7:19 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: Knee mill Low gear reversing on VFD
- Replies: 8
- Views: 5210
Re: Knee mill Low gear reversing on VFD
The small arm in the middle of the head in this picture with the black ball knob.
- Wed Jan 08, 2014 7:15 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: Knee mill Low gear reversing on VFD
- Replies: 8
- Views: 5210
Re: Knee mill Low gear reversing on VFD
Maybe I was not clear. I have a hall effects or magnetic switch/lever of some kind on my mill. When it is flipped down the Mill is in low gear/slow speeds. It reverses the direction of the cutter. I need that switch wired to the VFD so that when It is in low gear the VFD will still spin the motor th...