Centroid Community CNC Support Forum

Is there an actual picture that shows a DC1 installed on a AllinOneDC out there anyone has seen? Planning my install and wonding where the standoffs get mounted to on the controller.

Can anyone recommend a good nema 23 dc servo motor and encoder? I am wanting to try a cheaper 4th axis setup and will most likely go chinese and many use nema 23 motors. What do folks recommend?

I need to get the speed of my reverse faster then on my VFD. What speeds start and stop do you recommend for that?

I only have centroid running. Ended up buying the full license. Need to change my profile.

Eventually I will have both setup.

Mark that as a recommendation for a future update.

On the reverse head tapping cycle, is it possible to multiply the feedrate on retraction say by double? I know some reversing toolheads speed up when they are reversed (like procunier and I think tapmatic as well). Is this something that needs manually entered or can I add a retraction feedrate in t...

I asked tech support this one day and they told me but I did not take good enough notes. I have offline Centroid software installed in my office and have the dongle/usb key for it. I want to load my tool library from my mill's Centroid software onto the Offline Centroid. I know I take a snapshot on ...

Did you read the allinone install doc on the CD or on,this site?

Got it working tonight. Workes great now. Now have DP4 as my reference tool and have it working great as a z zero tool.

I had the same values in Parm 44 and 11 (entered as requested in the setup manuals for the TT1 and DP4). Is it correct to use the same values for both all the time?

Can you set z axis zero with the dp4 and have it work with the tool table for tools and their height offsets measured with the TT1? I don't have a my dp-4 height offset measured yet. I cant measure it with the tt1 as it is non-conductive. Do I need to measure that manually and assign that to height ...

Available does not mean free for sure.