Centroid Community CNC Support Forum

Thanks, I don't have teknic servos (im still running steppers) but I am having similar issues so I was hoping it would give me an avenue to look into to try resolving my problem. https://centroidcncforum.com/viewtopic.php?f=63&t=8649 Thanks I came across that the other day and im at ~1.75 turns...

More info:
The driver Terminal reads the following voltage:

(24-80vdc) VCC+ 82-83VDC
GND- 0VDC
A+ 41VDC
A- 41VDC
B+ 41VDC
B- 41VDC

cnckeith wrote: ↑Thu Aug 31, 2023 1:56 pm make a photo album of the machine and electrical cabinet so we can see what you are working with.

Let me know if there is anything specific you want to see!

1-Check the actual voltage supply to the drives if you are reusing the oem power supply. They might have several taps to match different incoming voltage. 2-It the artwork thousands of tiny lines, or a smooth arc? Look at it in node view of the software if you can. 3-You might try the opposite dire...

Unfortunately, I have no experience of your aXYZ machine but consult your OEM manual for servicing if available. Generally you need to carefully clean all ways, leadscrews, racks and sliding surfaces etc before applying lubricants and only where recommended, most importantly with the correct grade ...

Hey Nigelo, thanks for your response. -I'll double check the jog rate, while upgrading to v5.06 and having to manually input all the settings again I may have goofed it. - the axes are set to different step counts because I wanted to rule that out as the problem. I was doing testing last night when ...

I've been having some chatter/jerky motion within my diagonal cuts and arcs. I just upgrades to v5.06 so now I'm rechecking all my settings/configuration. As I was re-doing my turns per rev I noticed the dial indicator needle kind of bounces/hesitates every 0.01" move vs a smooth sweeping. This...

Thanks, I don't have teknic servos (im still running steppers) but I am having similar issues so I was hoping it would give me an avenue to look into to try resolving my problem.

What kind of additional tuning was done? what parameters were modified?

Thank you Marty, Some of the guys on the facebook group point the DB25 connector tab out to me as well. I believe it is the latest software but i'll be honest I don't keep up with the updates as much as I should... I did restore the last report from when the machine is working which is why I was con...